Manufacturer’s internal inspection service for inspection of tanks for transportation of dangerous goods by motor transport. Risks and opportunities in today’s realities
EDN: MMXUQM
Abstract
Introduction (problem statement and relevance). For several decades, the issues of development of a comprehensive system of inspection of safety of tanks for transportation of dangerous goods within the Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) dated 30 September 1957 have been staying relevant.
The purpose of the study is to improve efficiency of ADR implementation in the Russian Federation.
Methodology and research methods. The study analyses activity of technical authorities and regulatory & technical base including standardization documents. The Russian Federation conformity assessment system organizational structure within the ADR is presented as a prospect of development of technical regulation of tanks for transportation of dangerous goods in order to improve traffic safety.
Scientific novelty and results. Recommendations and proposals on organization of primary tests for domestic plants for manufacturing of tank trucks or road tankers for transportation of dangerous goods are formulated in order to ensure manufacturing of high-quality products and compliance with the ADR requirements. Risk analysis has been performed, and approaches to organization of internal inspection services at the manufacturers (manufacturing plants) have been considered, as well as an algorithm of assessment of such services. Analysis of international experience of conformity assessment process organization for tanks for transportation of dangerous goods within the ADR has been performed, and issues of stakeholders empowerment (accreditation/notification) have been addressed.
Practical significance. The formulated proposals will make it possible to improve efficiency of implementation of the ADR provisions in the Russian Federation.
About the Authors
S. A. AnikeevRussian Federation
Anikeev S.A. – director of technical regulation
Moscow 125438
A. M. Petrakov
Russian Federation
Petrakov A.M. – director of the Scientific Research Center for Technical Expertise
Moscow 125438
K. A. Kirillov
Russian Federation
Kirillov K.A. – PhD (Eng), general director
Lyubertsy, Zhilino-1 140073, Moscow Region
References
1. [ADR 2023. Agreement concerning the International Carriage of Dangerous Goods by Road]. Available at: https://unece.org/transport/standards/transport/dangerousgoods/adr-2023-agreement-concerning-international-carriage (accessed 25 October 2024).
2. Kisulenko B.V., Gusakov N.V., Bocharov A.V., Shchepkin A.I., Mironov A.A., Anikeev S.A. [Technical regulation in the automotive industry. Conformity assessment procedures]. Moscow, 2015. 256 p. ISBN 978-5-9906820-6-1. (In Russian)
3. Chondros T.G., Chondrou D.T., Papadigiannis A.S., Chondrou I.T., Fainekos E., Panteliou S.D. Design verification and testing of road tankers transporting dangerous goods. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie, 2019, no. 2 (707), pp. 48–64. DOI: 10.18698/0536-1044-2019-2-48-64. EDN: YWZVSH.
4. Kisulenko B.V. [Regulation “About car safety” is basis of car safety in the countries of the Eurasian economic union]. [On measures to improve road safety for the medium-term planning period (2018–2023): a collection of seminar reports]. Moscow, MADI, 2017, pp. 79–83. EDN: ZSEWPF. (In Russian)
5. [Information system “TechExpert: 6th generation”. Intranet]. Available at: http://lab3.cntd.ru/kodeks01/ (accessed 25 October 2024). (In Russian)
6. [GOST EN 13094-2020. Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction requirements]. Moscow, 2022. 66 p. (In Russian)
7. [GOST EN 14025-2020. Tanks for transport of dangerous goods. Metallic pressure tanks. Design and construction requirements]. Moscow, Rossiyskiy institut standartizatsii Publ., 2022. 43 p. (In Russian)
8. Chernyaev S.I. [Educational and methodological development: “Introduction to the road transportation of dangerous goods (ADR)”]. Nauchnyy zhurnal, 2018, no. 10 (33), pp. 11–16. EDN: YOWSPJ. (In Russian)
9. [List of competent authorities for the application of ADR, notifications in accordance with 1.9.4, 1.9.5 (tunnel restrictions) and other notifications]. Available at: http://www.unece.org/trans/danger/publi/adr/country-info_e.html#Russia (accessed 25 October 2024).
10. [Roadmap for accession to and implementation of the Agreement concerning the International Carriage of Dangerous Goods by Road (ADR)]. Available at: https://unece.org/sites/default/files/2022-11/ADR_Road_Map_RU.pdf (accessed 25 October 2024). (In Russian)
11. [Proposals for amendments to RID/ADR/ADN new proposals]. Available at: https://unece.org/sites/default/files/2021-06/ECE-TRANS-WP15-AC1-2021-31e.pdf (accessed 25 October 2024).
12. [ISO/IEC 17020:2012 Conformity assessment – Requirements for the operation of various types of bodies performing inspection (IDT)]. Moscow, Standartinform Publ., 2013. 16 p. (In Russian)
13. Kirillov K.A. [Expert competence requirements for inspections of tanks for the carriage of dangerous goods by road]. Gruzovik, 2024, no. 9, pp. 47–51. DOI: 10.36652/1684-1298-2024-9-47-51. EDN: LQSDAU. (In Russian)
14. Kirillov K.A. [Equipment for the testing, inspection and diagnostics of the technical condition of tanks for the transport of dangerous goods by road]. Gruzovik, 2024, no. 7, pp. 52–56. DOI: 10.36652/1684-1298-2024-7-52–56. EDN: SSHMFW. (In Russian)
Review
For citations:
Anikeev S.A., Petrakov A.M., Kirillov K.A. Manufacturer’s internal inspection service for inspection of tanks for transportation of dangerous goods by motor transport. Risks and opportunities in today’s realities. Trudy NAMI. 2025;(1):42-53. (In Russ.) EDN: MMXUQM